A Few days ago, i wrote about a job to made a line follower . After i was making the job, i was getting problem. To making the line follower, i was using dc motor . But, i was geting problem with torque from it. The DC motor is used can't give me enouh torque. i am confused about how to increase torque it. i was thingking about it. And i was remember about search engine, why i am not looking how to incresae torque from a dc motor at search engine ??? And then, i am looking from search engine about how to increase dc motor torque. i was founding solution about how to increase torque it. To increase it, we can use system gear. But, i am confuse how to aplication sistem gear at my line follower.
Robot line follower is a robot that is designed to be able to walk following the color of the line. Of course this requires basic knowledge of programming. In a line follower robot, we need a color sensor that will be used to detect line colors. Usually to distinguish between black and white. This color sensor, we can use infra red sensors, or can also use the LDR. Once we have a color sensor to detect the line, then we need the brain to make the robot can walk along the line. We can make it with an analog circuit, or with an IC that we will later fill with the program. To charge IC from line follower control, we can use arduino or by using Asembler programming. To learn this program, we must know the basics of logic. If we have the desire and sincerity in learning, to make a line follower is not a difficult thing. To make it easier we have a description of line follower, I took this from youtube video about lne follower. May be useful. link video : https://www.youtub